


Plan B Radial Brake 5/8–24
Not rated for .30 caliber
A Plan B compatible radial brake made for 6mm ARC. Ports run all the way around the body, so gas vents evenly in every direction to reduce recoil, and no timing is required.
NOT RATED FOR .30 CALIBER. 5/8–24 is the usual .30-caliber barrel thread, but this brake is bored for 6mm ARC only. Do not install it on a .308, 300 Blackout, 7.62 or any other .30-caliber barrel.
Plan B system: what goes with this part.
The Radial Brake 5/8–24 is the barrel-side half of the Plan B system. To complete the setup, add the HUB Mount Adapter to your suppressor.
- Optional accessories and replacement hardware
- Thread protector — optional: covers the device when the suppressor is off.
Plan B is made by CMT Cross Machine Tool. CMT's billet AR-15 and AR-10 receivers and UHPR handguards are sold at cmttac.com, the CMT Cross Machine Tool store.
Specifications
Product details
What a radial brake does
A radial muzzle brake has ports drilled all the way around its body instead of only on the sides. As the bullet leaves the barrel, the gas behind it escapes outward through those ports rather than straight ahead, which takes away part of the rearward push you feel as recoil. Because the gas leaves evenly around the full circle, the forces cancel each other and the muzzle is not pushed up, down or to either side. Like any brake it is louder to the sides, and the downward ports can raise dust when shooting prone.
Installation
No timing is required and no peel washer is needed: the port pattern is the same all the way around, so the brake can stop in any rotation. Thread it onto the barrel with your preferred thread locker and tighten it.
Purpose-built construction
Machined in the USA by CMT from 4150 CMV steel and QPQ nitride finished for durability and corrosion protection. Overall length is 1.730 inches and weight is 1.7 ounces.
Radial Brake questions.
What does a radial muzzle brake do?
A radial muzzle brake has ports all the way around its body. As the bullet leaves, gas escapes outward through those ports instead of straight ahead, which reduces the recoil you feel. Because the gas leaves evenly around the full circle, the muzzle is not pushed up, down or to either side.
Does the Plan B Radial Brake need to be timed?
No. The port pattern is the same all the way around, so there is no top or bottom to line up and no peel washer or crush washer to fit. Thread it onto the barrel and tighten it.
What caliber is the 5/8–24 Plan B Radial Brake for?
It is made for 6mm ARC on a 5/8–24 right-hand barrel thread. It is not rated for .30 caliber: do not install it on a .308, 300 Blackout or 7.62 barrel, even though those often share the 5/8–24 thread. For a 1/2–28 barrel in .224 caliber and smaller or 6mm ARC, choose the Plan B Radial Brake 1/2–28.
Does the Radial Brake work with the Plan B suppressor mount?
Yes. It is the barrel-side half of the Plan B system: add the Plan B HUB Mount Adapter to a HUB-compatible suppressor and it mounts on this brake. The thread protector covers the brake's threads and taper when the suppressor is off.

