Skip to main content
Home / Plan B muzzle devices / Radial Brake 1/2–28
Plan B Radial Brake with 1/2-28 threads, muzzle end and radial ports
Plan B Radial Brake 1/2–28 from the thread end, showing the wrench flats and mount threadsPlan B Radial Brake 1/2–28 standing on its hex, showing the radial ports
Radial brake

Plan B Radial Brake 1/2–28

$53.99

A Plan B compatible radial brake for .224-caliber and smaller projectiles and 6mm ARC. Ports run all the way around the body, so gas vents evenly in every direction to reduce recoil, and no timing is required.

Available to add to your cart
My cart
Complete the Plan B system

Plan B system: what goes with this part.

The Radial Brake 1/2–28 is the barrel-side half of the Plan B system. To complete the setup, add the HUB Mount Adapter to your suppressor.

  • Optional accessories and replacement hardware
  • Thread protector — optional: covers the device when the suppressor is off.

Plan B is made by CMT Cross Machine Tool. CMT's billet AR-15 and AR-10 receivers and UHPR handguards are sold at cmttac.com, the CMT Cross Machine Tool store.

Specifications

Thread pitch1/2–28 RH
Caliber.224 or smaller, and 6mm ARC
Material4150 CMV steel
Overall length1.730 in.
Weight2.4 oz.
FinishQPQ nitride
TimingNot required
OriginMade in America
ManufacturerCross Machine Tool (CMT), Tennessee, USA

Product details

What a radial brake does

A radial muzzle brake has ports drilled all the way around its body instead of only on the sides. As the bullet leaves the barrel, the gas behind it escapes outward through those ports rather than straight ahead, which takes away part of the rearward push you feel as recoil. Because the gas leaves evenly around the full circle, the forces cancel each other and the muzzle is not pushed up, down or to either side. Like any brake it is louder to the sides, and the downward ports can raise dust when shooting prone.

Installation

No timing is required and no peel washer is needed: the port pattern is the same all the way around, so the brake can stop in any rotation. Thread it onto the barrel with your preferred thread locker and tighten it.

Purpose-built construction

Machined in the USA by CMT from 4150 CMV steel and QPQ nitride finished for durability and corrosion protection. Overall length is 1.730 inches and weight is 2.4 ounces.

Confirm thread pitch, caliber and mount compatibility before installation. Installed, fired or modified products cannot be returned.

Radial Brake questions.

What does a radial muzzle brake do?

A radial muzzle brake has ports all the way around its body. As the bullet leaves, gas escapes outward through those ports instead of straight ahead, which reduces the recoil you feel. Because the gas leaves evenly around the full circle, the muzzle is not pushed up, down or to either side.

Does the Plan B Radial Brake need to be timed?

No. The port pattern is the same all the way around, so there is no top or bottom to line up and no peel washer or crush washer to fit. Thread it onto the barrel and tighten it.

What caliber is the 1/2–28 Plan B Radial Brake for?

It is rated for .224-caliber and smaller projectiles, and for 6mm ARC, on a 1/2–28 right-hand barrel thread. For a 6mm ARC barrel threaded 5/8–24, choose the Plan B Radial Brake 5/8–24.

Does the Radial Brake work with the Plan B suppressor mount?

Yes. It is the barrel-side half of the Plan B system: add the Plan B HUB Mount Adapter to a HUB-compatible suppressor and it mounts on this brake. The thread protector covers the brake's threads and taper when the suppressor is off.

Customer experience

Product reviews.

—☆☆☆☆☆Loading reviews…
Loading reviews…

Write a review

Verified-purchase reviews publish immediately. Unverified reviews are checked before publication. Your email stays private.