Plan B FAQs.
Straight answers on thread pitch, the Plan B mount, HUB adapters, flash comps versus brake comps, timing, peel washers and who makes the parts. Each section links to the guide with the full detail.
Threads and the mount.
What is the Plan B thread pitch?
Plan B flash comps and brake comps are threaded for the barrel in 1/2–28 (for .224-caliber and smaller barrels) or 5/8–24 (for .308-caliber and smaller), both right-hand. The suppressor side of every Plan B device is the same: a .900"–24 right-hand thread with a 25-degree inclusive taper, which the Plan B HUB Mount Adapter threads onto for a gas-tight seal. The adapter's other end is the suppressor's 1.375–24 HUB thread.
What is the HUB thread pitch?
HUB is 1.375–24: the thread on the back of the suppressor that the Plan B HUB Mount Adapter screws into. The Plan B side of the adapter is .900"–24 on a 25-degree taper; the barrel side is the muzzle device's own 1/2–28 or 5/8–24. HUB and Plan B compatibility guide.
How does the Plan B HUB Mount Adapter attach to the muzzle device?
It threads onto the device's .900"–24 right-hand mount thread and seats on the 25-degree inclusive taper, which centres the suppressor and makes the gas-tight seal. Its other end is the 1.375–24 HUB thread that goes into the suppressor, so one adapter moves a HUB suppressor onto any Plan B flash comp or brake comp.
Are the Plan B muzzle-device threads right-hand?
Yes. The Plan B flash comps and brake comps are right-hand 1/2–28 or 5/8–24 on the barrel side, and the .900"–24 mount thread is right-hand too. Confirm the specifications on the exact product page before ordering.
Can I identify muzzle threads by caliber alone?
No. Caliber may suggest a commonly used pitch, but it does not identify the exact barrel thread. Confirm it from the barrel manufacturer or by qualified measurement.
Which thread pitch should I choose?
Choose only the pitch confirmed by the barrel manufacturer or by verified markings and measurement. The Plan B catalog includes 1/2–28 and 5/8–24 options, but those pitches are not universal.
Do both muzzle-device pitches work with the Plan B suppressor mount?
Yes. The .900"–24 mount thread and 25-degree taper are the same on the 1/2–28 and 5/8–24 devices, so one Plan B HUB Mount Adapter fits either. The barrel thread, bore, suppressor depth, alignment and manufacturer approval still need separate verification.
Does a peel washer change thread compatibility?
No. A peel washer adjusts spacing for indexing a compatible muzzle device. It does not change the barrel thread, the muzzle-device bore or suppressor compatibility, and it does not make one thread pitch fit another.
HUB and the adapters.
Is HUB the same thing as Plan B?
No. HUB describes the rear suppressor interface, commonly a 1.375–24 internal thread. Plan B describes the suppressor mount's connection to a compatible muzzle device. The Plan B HUB Mount Adapter bridges those interfaces in a supported system.
Is a Direct-Thread HUB Adapter the same as a Plan B HUB Mount Adapter?
No. A Direct-Thread HUB Adapter connects a compatible HUB suppressor directly to a confirmed 1/2–28 or 5/8–24 barrel thread. The Plan B HUB Mount Adapter connects the suppressor to a compatible Plan B muzzle device. They are alternatives, not stacked components.
Can one Direct-Thread HUB Adapter fit both pitches?
No. The 1/2–28 and 5/8–24 adapters are separate products. Choose only the model that matches the barrel and is supported by the suppressor manufacturer.
Will either adapter fit every HUB suppressor?
No universal guarantee should be assumed. Verify the exact suppressor model, rear interface, available depth and all manufacturer restrictions.
Are all Plan B muzzle devices suppressor compatible?
They are designed around the Plan B mounting interface, but the complete combination must still be verified for barrel threads, bore, mount, suppressor depth, caliber and manufacturer approval.
Flash comp or brake comp.
Does the Plan B Flash Comp need to be timed?
No. The Plan B Flash Comp product specifications state that timing is not required.
Does a muzzle brake make a firearm louder?
Redirecting gas can increase perceived blast and concussion around the shooter and nearby people. Evaluate the intended use and follow all hearing-protection guidance.
What does a peel washer change?
A peel washer changes the spacing used to index a compatible muzzle device. Each pack has .002-inch layers for fine adjustment. It does not change the barrel thread, the muzzle-device bore or suppressor compatibility.
Can either style mount a suppressor?
Both are built around Plan B compatibility, but the exact mount, suppressor, bore, depth, caliber and alignment must be verified as a complete system.
Who makes Plan B.
Who makes Plan B muzzle devices?
Cross Machine Tool Co, Inc. (CMT), a veteran-owned precision machining company in Tennessee with more than 30 years of machining experience. Plan B Muzzle Devices is CMT's muzzle device brand, and every Plan B product is manufactured, packed and shipped in house.
Where are Plan B muzzle devices made?
In the USA, at Cross Machine Tool's own shop in Tennessee, where the machining, packing and shipping happen in house.
Are Plan B devices and CMT devices the same thing?
Yes. Plan B is the brand name and CMT (Cross Machine Tool) is the manufacturer. A Plan B flash comp, brake comp, HUB Mount Adapter or direct-thread HUB adapter is a CMT-made part sold under the Plan B name.
What are Plan B muzzle devices made from?
The flash comps, brake comps and the HUB Mount Adapter are machined from 4150 CMV steel and QPQ nitride finished to a 68 RC surface hardness. The direct-thread HUB adapters carry a black Melonite QPQ finish, and the peel washers are laminated steel.
What if a Plan B part is out of stock?
The product page shows “Email me when it's back in stock” in place of the Add to cart button. Enter your email and we send one notice when the part is available again. It is a single email about that item, not a mailing list, and stock is sold first come, first served at the price shown that day.
